BGC DURASHEET™ PROVIDES FIRST RATE EXTERNAL CLADDING FOR GABLE ENDS, EAVES, SOFFITS, CAR PORTS AND VERANDAH LININGS. IT'S A GENERAL-PURPOSE SHEET YOU CAN USE ON BOTH TIMBER AND STEEL-FRAMED BUILDINGS.

Durasheet™ cladding can be jointed in a number of ways but must be joined over framing support. Framing must be a minimum of 45mm thick except for sealant joints which must be on a minimum of 70mm framing or 2 x 35mm studs well spiked.

Vertical Joints:

• uPVC jointer
• Timber Batten
• Flexible Sealant Joint

External and internal corners:

• uPVC jointer
• Timber Batten
• Flexible Sealant

Mid floor Joint

• Either h moulding or Z flashing

The above are applicable for both Direct fixed and Cavity Construction.  Soffit sheets can be joined off stud with a uPVC Joiner.  Refer to architectural drawings for details of the above joints.

For more detailed installation instructions, please download the Durasheet™ brochure.